Worksafe Diamond Core Drill Kit WSD900

Product Sections

Information Pages

Frequently Asked Questions

About Us / Security

Delivery Information

External Links

Customer Feedback

HobUK Downloads

Trade Counters

UK Tools Only Explained

Best Sellers

Dewalt DC925KB 18v XRP Cordless Combi Drill C/w 3 Batteries

£249.99

More Info..

Makita Domestic Power Pressure Washer HW101

£44.99

More Info..

Palm Laser Level PLS180 Self Leveling Laser Liner C/w Case

£199.00

More Info..

ECHO SRM220ESL 21.2cc Petrol Brushcutter C/w Face Shield & Gloves

£199.99

More Info..

www.HobUK.co.uk | Drilling and Cutting | Diamond Core Drill Kits | Worksafe Diamond Core Drill Kit WSD900

Worksafe 8pc Diamond Core Drill Kit WSD900

Features:

Aluminium Carry Case
900 Watt Motor
Double Insulated
Net Weight: 3.8kg
No Load Speed: 0-1700
3 x Diamond Core bits
Diamond Core Accessory Set
12 Month Manufacturer Warranty
240v & 110v Available

Specification:

The WSD900 Worksafe diamond core drill features an extremely powerful 900 watt motor in either 240 or 110 volt models, it is supplied with a side grip handle that can be rotated to suit the operator. The drill also features externally changeable brushes, and comes supplied with a spare set, the rear handle and trigger design allows optimum control when drilling in all conditions, for both safety and comfort.

The core drills supplied with this kit are; 1 x 38mm, 1 x 52mm and 1 x 117mm, the core bits feature a new technology in diamond drilling, with a ridged edge on each diamond segment, this allows for faster waste clearance and a faster cut.

The set is all supplied in an aluminium foam lined and moulded lockable carry case, keeping each item safe from damage when in transport. The diamond core kit also contains 1 of each of the following; Hex adaptor, Hex 250 extension, Pilot drill bit and extractor drift.

Price: £195.74
(£229.99 Including VAT at 17.5%)

Please Select Required Voltage

Diamond Core Drilling Guide

Pilot drill the wall first with a 13mm masonary drill.
Follow through with required size core drill
Use 850 watt (min) drill fitted with clutch and variable speed.
Hammer action must never be used when drilling with diamond core drills.
Use machine between 900-1300rpm, the harder the brick and larger diameter of the core drill the lower rpm speed should be.
Make sure the chuck is tight.
Clear swarf at regular intervals, as a build up will cause the core bit to over heat, extensive clutch wear and possible loss of diamond segments.
Rotate core bit when entering and leaving a hole.
Keep machine level.
Never force the diamond bit, let it do the work, this will ensure long life and reduce the chance of breakage.
If the bit starts to vibrate, reduce pressure.